Dear contributor,

Our automatic CI successfully passed with your patch(es). Please find some details below.

In  arm-linux-gnueabihf cross, after:
  | 57 commits in binutils,gcc,glibc,gdb
  | d36b7ef85a3 loongarch gcc-4.9 build error
  | e2c060da1c0 Automatic date update in version.in
  | a9b7bbb1729 Use bool in ada_type_of_array
  | e88bc211aeb Document remote protocol pid and thread id sizes
  | a4481c8ff80 LoongArch: only insert align section for ld -r if an input has R_LARCH_ALIGN or R_LARCH_RELAX
  | ... and 1 more commits in binutils
  | a826538b92a9 Daily bump.
  | 58ce322cb0ca Revert "libstdc++: Fix LD_LIBRARY_PATH when testing an installed compiler"
  | 8a5e08f24b9f cobol: Repair mh_identical MOVEs involving DEBUG registers [PR126277]
  | 2fa25687ad7c cobol: Update --help text to be consistent with gcobol.1.  Fix PR 125987.
  | ccf32d2937db openmp: Pass loop parameters to static worksharing dispatch builtins for OMPT
  | ... and 37 more commits in gcc
  | 2678adc8eb9 sparc: Align THP tests to the 8MB huge-page size
  | 82a0bf8d33f elf: Defer arch PLT IFUNC relocations in the two-phase relocation split
  | c82b6095964 sparc: Fix static IFUNC startup crash by redirecting __mempcpy (BZ #34396)
  | d36b7ef85a3 loongarch gcc-4.9 build error
  | e2c060da1c0 Automatic date update in version.in
  | a9b7bbb1729 Use bool in ada_type_of_array
  | e88bc211aeb Document remote protocol pid and thread id sizes
  | a4481c8ff80 LoongArch: only insert align section for ld -r if an input has R_LARCH_ALIGN or R_LARCH_RELAX
  | ... and 1 more commits in gdb

Produces Success:
  | Results changed to
  | # reset_artifacts:
  | -10
  | # true:
  | 0
  | # build_abe binutils:
  | 1
  | # build_abe stage1 -- --set gcc_override_configure=--disable-multilib --set gcc_override_configure=--with-float=hard --set gcc_override_configure=--with-fpu=vfpv3-d16 --set gcc_override_configure=--with-mode=thumb --set gcc_override_configure=--with-tune=cortex-a9 --set gcc_override_configure=--with-arch=armv7-a:
  | 2
  | # build_abe linux:
  | 3
  | # build_abe glibc:
  | 4
  | # build_abe stage2 -- --set gcc_override_configure=--disable-multilib --set gcc_override_configure=--with-float=hard --set gcc_override_configure=--with-fpu=vfpv3-d16 --set gcc_override_configure=--with-mode=thumb --set gcc_override_configure=--with-tune=cortex-a9 --set gcc_override_configure=--with-arch=armv7-a:
  | 5
  | # build_abe gdb:
  | 6
  | # build_abe qemu:
  | 7
  | 
  | From
  | # reset_artifacts:
  | -10
  | # true:
  | 0
  | # build_abe binutils:
  | 1
  | # build_abe stage1 -- --set gcc_override_configure=--disable-multilib --set gcc_override_configure=--with-float=hard --set gcc_override_configure=--with-fpu=vfpv3-d16 --set gcc_override_configure=--with-mode=thumb --set gcc_override_configure=--with-tune=cortex-a9 --set gcc_override_configure=--with-arch=armv7-a:
  | 2
  | # build_abe linux:
  | 3
  | # build_abe glibc:
  | 4
  | # build_abe stage2 -- --set gcc_override_configure=--disable-multilib --set gcc_override_configure=--with-float=hard --set gcc_override_configure=--with-fpu=vfpv3-d16 --set gcc_override_configure=--with-mode=thumb --set gcc_override_configure=--with-tune=cortex-a9 --set gcc_override_configure=--with-arch=armv7-a:
  | 5
  | # build_abe gdb:
  | 6
  | # build_abe qemu:
  | 7

Used configuration :
 *CI config* tcwg_gnu_cross_build arm-linux-gnueabihf cross
 *configure and test flags:* --target arm-linux-gnueabihf --disable-multilib --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb --with-tune=cortex-a9 --with-arch=armv7-a

If you have any questions regarding this report, please ask on linaro-toolchain@lists.linaro.org mailing list.

-----------------8<--------------------------8<--------------------------8<--------------------------

The information below contains the details of the failures, and the ways to reproduce a debug environment:

You can find the failure logs in
 * http://54.172.246.49:9090/jobs/tcwg_gnu_cross_build--master-arm-build/builds/10129/archive/artifacts/
The full lists of regressions and improvements as well as configure and make commands are in
 * http://54.172.246.49:9090/jobs/tcwg_gnu_cross_build--master-arm-build/builds/10129/archive/artifacts/notify/

Current build   : http://54.172.246.49:9090/jobs/tcwg_gnu_cross_build--master-arm-build/builds/10129/archive/artifacts/
Reference build : http://54.172.246.49:9090/jobs/tcwg_gnu_cross_build--master-arm-build/builds/10128/archive/artifacts/