Dear contributor,

Our automatic CI successfully passed with your patch(es). Please find some details below.

In  arm-linux-gnueabihf cross, after:
  | 20 commits in binutils,gcc,glibc,gdb
  | 1074129d851 Automatic date update in version.in
  | ca8bf5f5dd6 gdb: recreate the frame_info_ptr in get_prev_frame_maybe_check_cycle
  | 0fb12bd362c gdb: LoongArch: Add internal TLS support
  | 06653836fdd [pre-commit] Set stages for isort
  | 986fe870abb Daily bump.
  | ed1cb8abdbf [PATCH] RISC-V: Fix the LRA crashing triggered by TLSDESC clobber updates
  | 913ff90691d [PATCH] RISC-V: Do not grow complete unrolling at -O2
  | c348f5c5e99 [PR target/123883] Inefficient bit manipulation code on RISC-V port
  | 93352420faa [PATCH] lra: mark the hard frame pointer live when LRA decides it is needed [PR117184]
  | ... and 6 more commits in gcc
  | 6b29e74c73 math: Update tanh from CORE-MATH (revision cf237fa0)
  | 1074129d851 Automatic date update in version.in
  | ca8bf5f5dd6 gdb: recreate the frame_info_ptr in get_prev_frame_maybe_check_cycle
  | 0fb12bd362c gdb: LoongArch: Add internal TLS support
  | 06653836fdd [pre-commit] Set stages for isort

Produces Success:
  | Results changed to
  | # reset_artifacts:
  | -10
  | # true:
  | 0
  | # build_abe binutils:
  | 1
  | # build_abe stage1 -- --set gcc_override_configure=--disable-multilib --set gcc_override_configure=--with-float=hard --set gcc_override_configure=--with-fpu=vfpv3-d16 --set gcc_override_configure=--with-mode=thumb --set gcc_override_configure=--with-tune=cortex-a9 --set gcc_override_configure=--with-arch=armv7-a:
  | 2
  | # build_abe linux:
  | 3
  | # build_abe glibc:
  | 4
  | # build_abe stage2 -- --set gcc_override_configure=--disable-multilib --set gcc_override_configure=--with-float=hard --set gcc_override_configure=--with-fpu=vfpv3-d16 --set gcc_override_configure=--with-mode=thumb --set gcc_override_configure=--with-tune=cortex-a9 --set gcc_override_configure=--with-arch=armv7-a:
  | 5
  | # build_abe gdb:
  | 6
  | # build_abe qemu:
  | 7
  | 
  | From
  | # reset_artifacts:
  | -10
  | # true:
  | 0
  | # build_abe binutils:
  | 1
  | # build_abe stage1 -- --set gcc_override_configure=--disable-multilib --set gcc_override_configure=--with-float=hard --set gcc_override_configure=--with-fpu=vfpv3-d16 --set gcc_override_configure=--with-mode=thumb --set gcc_override_configure=--with-tune=cortex-a9 --set gcc_override_configure=--with-arch=armv7-a:
  | 2
  | # build_abe linux:
  | 3
  | # build_abe glibc:
  | 4
  | # build_abe stage2 -- --set gcc_override_configure=--disable-multilib --set gcc_override_configure=--with-float=hard --set gcc_override_configure=--with-fpu=vfpv3-d16 --set gcc_override_configure=--with-mode=thumb --set gcc_override_configure=--with-tune=cortex-a9 --set gcc_override_configure=--with-arch=armv7-a:
  | 5
  | # build_abe gdb:
  | 6
  | # build_abe qemu:
  | 7

Used configuration :
 *CI config* tcwg_gnu_cross_build arm-linux-gnueabihf cross
 *configure and test flags:* --target arm-linux-gnueabihf --disable-multilib --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb --with-tune=cortex-a9 --with-arch=armv7-a

If you have any questions regarding this report, please ask on linaro-toolchain@lists.linaro.org mailing list.

-----------------8<--------------------------8<--------------------------8<--------------------------

The information below contains the details of the failures, and the ways to reproduce a debug environment:

You can find the failure logs in
 * http://54.172.246.49:9090/jobs/tcwg_gnu_cross_build--master-arm-build/builds/10131/archive/artifacts/
The full lists of regressions and improvements as well as configure and make commands are in
 * http://54.172.246.49:9090/jobs/tcwg_gnu_cross_build--master-arm-build/builds/10131/archive/artifacts/notify/

Current build   : http://54.172.246.49:9090/jobs/tcwg_gnu_cross_build--master-arm-build/builds/10131/archive/artifacts/
Reference build : http://54.172.246.49:9090/jobs/tcwg_gnu_cross_build--master-arm-build/builds/10130/archive/artifacts/